Thank you for purchasing one of our iron on patches!
They're super easy to apply, thanks to the iron-on backing that is included on all of our patches as standard.
Application instructions
1. Prepare the material you're going to apply the patch to. Make sure the material is flat and iron out any creases. This will help to maximise the quality of the adhesion.
2. Lay the patch onto the material in the position you want it to end up in
3. Cover the patch with a bit of thin material to reduce the chance of the iron damaging the face of the badge.
4. Place a hot iron onto the area for a short time. We would recommend no more than about 20 seconds. After this, check the adhesion and if it needs a little more time then give it a further 5-10 seconds.
5. Leave the patch for a few minutes to allow it to cool and for the adhesion to take fully.
6. And you're now ready to hit the trails in style!
After-care
It is best to ensure the garment is washed at 30-40 degree temperature.
Recommended materials
Our iron-on badges get the best results when applied to cotton or polyester.
If you have any questions at all, please feel free to contact us.